Vehicle requirements for handling steel saw pipe:
1. The state stipulates the bulk mode of spiral steel pipe. If the customer requests the baler to be considered, as appropriate, the material band and fixing must be between 159MM diameter and 500mm, each of which should be twisted into at least two, and according to the outer diameter spiral tube and moderate weight increase to prevent loosening.
2. The length of spiral steel tube can not be packed.
3. Thread protectors should be protected at both ends of threaded steel pipes, such as threads. Lubricating threads or antirust agents. The two ends of the helical tube can be opened according to the requirements, and finally a nozzle protector is provided.
4. If the spiral steel pipe is put into the container, the soft mattress moisture refers to the fabric and cushion on the inner container. For textile spiral tubes dispersed in containers, they can be external binding or welding protection, such as brackets. Spiral steel packaging should avoid loosening and damage during normal handling, transportation and storage.
5. If the demand side for spiral steel packaging materials and packaging has special requirements, it should be noted in the contract; if not specified, the packaging materials and methods can be chosen by all parties.
6. Packaging materials should meet relevant requirements. If there is no need for packaging materials, they should meet the expected use and avoid waste and environmental pollution.